T200 Dry Waste System

This Equipment is CSA Approved and Conforms to all Current ANSI Z245.2 Safety Standards. In order to provide the most currently engineered and designed equipment, we reserve the right to change specifications without notice. This brochure is intended to provide information only, and should not be used in an arbitrary manner to judge equipment for any particular purpose..

Learn MoreBook a consultation

Standard Features

T200 photo

  • CSA Approved Design
  • Heavy duty oil-tight pushbutton controls
  • Key lockable start pushbutton
  • Automatic multi-cycle operation
  • PLC controlled system
  • Full-container light

Optional Equipment

T200 photo

  • Advance-warning light
  • Fluid-filled pressure gauge
  • Oil heater
  • Odour control system
  • Open hopper (for top or loading dock)
  • Fully enclosed hopper with door
  • Through the wall installation kits
  • Walk-on or drive-on decks
  • Safety gate
  • Hydraulic cart-dump systems

Mechanical Specifications

Charge Chamber Volume2222
Charge Chamber Opening Size42″ x 60″42″ x 60″42″ x 60″42″ x 60″
Ram Face Size27″ x 60″27″ x 60″27″ x 60″27″ x 60″
Ram Penetration13″13″13″13″
Compaction Force Normal56,500 lbs76,930 lbs113,000 lbs50,240 lbs
Compaction Force Maximum64,975 lbs88,470 lbs129,950 lbs55,260 lbs
Cycle Time63 seconds63 seconds73 seconds63 seconds
System Pressure Normal2000 psi2000 psi2000 psi2000 psi
System Pressure Maximum2200 psi2200 psi2200 psi2200 psi
Pump Capacity10 gpm10 gpm10 gpm10 gpm
Motor Size10 hp15 hp15 hp10 hp
Cylinder Size6″0 x 54″7″0 x 54″2 x 6″0 x 54″2 x 4″0 x 42″
Cylinder TypeDouble ActingDouble ActingDouble ActingDouble Acting
Ram Face Pressure Normal34.2 psi46.6 psi68.5 psi30.5 psi
Ram Face Pressure Maximum39.4 psi53.6 psi78.8 psi33.4 psi
Oil Tank Capacity20 gal25 gal75 gal20 gal
Shipping Weight4,100 lbs5,100 lbs7,500 lbs4,100 lbs

Electrical Specifications

Control System110 volt 60 cycle powered by step-down transformer
Control PanelFully wired. Keyed start button, emergency stop, full light, reset button, PLC, current sensor
Power208/230/575 Volt, 3 Phase 60 Cycle


Table Diagram