THB-6060 SERIES

Categories: ,

Description

The THB baler series includes two distinct models (THB-6048 and THB-6060) both of which are available in three upgrades or trim levels. Both models are full penetration units; which means that they can process a wide range of materials (plastic film and bottles, fine paper, aluminum cans and cardboard) without any need for the material to be preconditioned via a fluffer or shredder. The oversized clear top openings (60″ x 48″ and 60″ x 60″) enables the units to easily process large items and/or large volumes of materials with each stroke of the press head. Upgrades such as tongue and groove floors, AR-400 wear plates and conveyors can be added as required to provide our clients with a fully functioning and all encompassing baling system.

Learn MoreBook a consultation

Technical Details

Standard Features

  • UL/CSA Approved Design
  • Meets/exceeds ANSI Z245.2 regulations
  • Meets/exceeds OSHA regulations
  • PLC “flex-design” based control systems
  • NEMA 4 rated enclosure
  • Internal timers prevent system run-on
  • Self-diagnostic indicators
  • 24-volt controls
  • Adjustable multi-cycle timer
  • 75% and 100% full light
  • Auto-alert maintenance mode
  • Heavy duty oil-tight pushbutton controls
  • Key lockable start pushbutton

Mechanical Specifications

THB-6060THB-6060HDTHB-6060XHD
Charge Chamber Opening Size60″ x 60″60″ x 60″60″ x 60″
Bale Size60″ x 48″ x 30″60″ x 48″ x 30″60″ x 48″ x 30″
Bale Weight1200 to 1300 lbs1300 to 1400 lbs1400 to 1500 lbs
Ram Penetration45″45″45″
Baling Force Normal76,930 lbs113,000 lbs153,860 lbs
Baling Force Maximum92,316 lbs135,600 lbs184,632 lbs
Cycle Time65 sec. (no load)75 sec. (no load)65 sec. (no load)
System Pressure Normal2000 psi2000 psi2000 psi
System Pressure Maximum2400 psi2400 psi2400 psi
Pump Capacity38 gpm (Hi-Lo)48 gpm (Hi-Lo)58 gpm (Hi-Lo)
Motor Size20 hp30 hp40 hp
Cylinder Type1″ x 7″2″ x 6″2″ x 7″
Ram Face Pressure Normal42.7 psi62.8 psi85.5 psi
Ram Face Pressure Maximum51.3 psi75.4 psi102.6 psi
Oil Tank Capacity125 gal175 gal225 gal
Shipping Weight15,500 lbs16,500 lbs19,500 lbs

Electrical Specifications

Control System110 volt 60 cycle powered by step-down transformer
Control PanelFully wired. Keyed start button, emergency stop, full lights, reset button
Power208/230/575 Volt, 3 phase 60 cycle

Dimensions

Table Diagram

ABCDE
THB-6060242″48″72″60″60″
THB-6060HD242″48″72″60″60″
THB-6060XHD242″48″72″60″60″

Optional Equipment

  • Deep chamber (60″)
  • Full bale light
  • Hydraulic bale dump
  • R.H. hinged bale door

Electrical system upgrades

  • System monitor: SCADA panel (add-on panel or integrated upgrade) provides cell-based monitoring of all systems including container fullness, safety circuit devices, container positioning, hydraulic system devices including reservoir fullness, oil temperature and system in-use time
  • Remote start/stop station
  • Auto-start system (photo-eye or sonic sensor)
  • Wireless remote control
  • Biometric interface
  • HMI based operator interface for tie into building monitoring systems

Hydraulic system upgrades

  • Single phase and three phase power units
  • Hi-lo hydraulic pumps for reduced cycle time applications
  • Regen circuit for improved hydraulic fluid circulation
  • Over-sized oil reservoirs to accommodate ancillary devices and improved heat sink
  • Oil cooler for high duty cycle applications
  • Bio-degradable oil
  • In tank oil heater
  • Sonic sensors for oil fullness monitoring
  • Low temperature oil (as low as -60 Celsius is available)

Compactor upgrades

  • Custom chute systems
  • Custom weather enclosures
  • Drive-on deck systems (certified up to 20,000 lbs.)
  • Tongue and grooved floor designs
  • AR plate floors and sides for reduced press head/compactor shell wear
  • Pad-less set-up for installation on asphalt
  • Custom hydraulic cart tipping systems
  • Light curtain-based safety sensors
  • Custom steel safety barriers
  • Custom hydraulic lift systems
Download documentation

Related products